CRC Zinc is a weld through a single component zinc-rich compound that offers the same advantages as hot-dip galvanizing by forming a highly-protective coating with 95% highest purity zinc on bare steel or iron surfaces. It is ideal for repairing damaged galvanized surfaces or as a convenient and easy-to-apply alternative if hot-dip galvanizing is not available.

The zinc particles fuse directly to clean metal and form an electro-chemical bond that – due to sacrificial anodization of zinc – stops rust and rust creepage, even when scratched, abraded or dented.

The quick-drying, tough coating is resistant to salt corrosion, water and heat and makes CRC Zinc It the premium product if long-term protection in harsh conditions and highly corrosive environments is required.

It provides excellent cover and is capable to be applied as a heavy film for extra protection without forming runs. Delivered from a unique aerosol system giving a smooth even coat.

Ongoing protection can be achieved through simple re-coating within 6 years, depending on conditions. Protection in extreme conditions may require re-application more frequently.

It can act as a finish coat on clean iron, steel, and welds. Top-coating CRC Zinc It with another product of CRC’s Zinc coating range provides extra protection and a selection of bright metallic or colored gloss finishes – the ultimate choice for your application.

If other colors are required, CRC Zinc can be top-coated with most standard decorative paint systems for metals.

Features & Benefits:

Zinc-rich – 95% highest purity zinc in the dried film, fuses directly to iron or steel surfaces
Weld through – Zinc It provides a unique coating that can be welded through
Same advantages as hot-dip galvanizing – Exceptional rust protection
Excellent adhesive qualities – Forms a tough coat for long-term protection
Easy application – High film build in one step
Heavy-duty – Resistant to salt corrosion, water, and heat. Powerful protection in harsh conditions
High Heat Resistance – Up to 500°C
Long-term corrosion protection – Corrosion Protection Factor 72 (up to 6 years outdoors, depending on conditions)
Sacrificial anodization of Zinc – Stops rust and rust creepage even when scratched, abraded or dented
Fast-drying – Touch dry in 20 minutes, recoat at any stage, full cure in 24 hours
Easy re-application over the existing film and/or clean surfaces – For ongoing protection
Finish coat – Can act as the finish coat, no need for primer
Excellent primer – May be over-coated with most standard protective paint systems for metal
Does not contain CFCs, methylene chloride
Excellent weldability
MPI Approved C23

Applications:

Structural steel or frames – Welded seams, spot welding repairs, rivet holes, signs and signposts, pipes, roofs
Electrical – Transformers, transmission towers, earth pegs
Farm equipment – Water tanks, tank stands, fences, gates, animal raceways in milking sheds and yards, farm implements and tractor drawbars, metal junction, terminal boxes, pump equipment, corrugated metal buildings
Boats and boat trailers – Shackles, winches, drawbars, subframes, wheel, and guards
Car or caravan – Inner door panels, tow bars, exhaust tailpipes and wheel protection under hub caps
Perfect touch-up – For galvanized products which have been cut, drilled or welded
At home – On iron railings, roofing and spouting, gutters, plumbing, ducting, radio and TV aerials, outdoor fixtures, hinges, fences and gates, wrought iron, air conditioning, and refrigeration units
Industrial – Equipment and machinery, machine housings
Roading and Construction – Bridges, guard rails, lamp stands
Wherever galvanizing requires repair or bare steel or iron needs protection
For use on steel or iron – Not effective when used on non-ferrous metals

CRC

Categories

Cleaner & Lubricants

Industrial Sealants

Rust Treatment

All CRC Products

CRC 808 Silicone Spray

RM56.00

CRC Red Urethane Seal Coat

RM86.00

CRC Silicone Grease

RM72.00

CRC Zinc It Galvanize Rust Protection

RM78.60